Datatek IPv6 Transformer Quick Start Guide Manuel d'utilisateur télécharger pdf (Page 2)

IPv4-IPv6 Transformer Quick Start Guide

www.datatekcorp.com

1. Connect Transformer

It is recommended to connect the IPv4 Host-Side Device with a Cross-Over LAN cable.

The IPv6 Network-Side interface can be connected to any hub or switch using a

standard straight Cat-5 cable. The console port can be connected to a serial port on a

PC and set for 9600 baud, no parity, one (1) stop bit, using a 9pin null modem cable.

Figure 1-1

1 2 3 4 5 6 7 ... 12 13

Pas de commentaire

Datatek IPv6 Transformer Quick Start Guide Manuel d'utilisateur Page 2