Datatek DT-6061 Manuel d'utilisateur télécharger pdf (Page 8)

DT-6061 User's Manual - Platform (Build 17.1)

12/14/09

Datatek Applications Inc. 8

1 INTRODUCTION

The DT-6061 (Embedded Network Processor) is a network applications computer that applies

customer specific protocol operations (protocol translation and termination) of network

connections that require such a function in a distributed network. This product has many

similarities with DT-6160 and DT-6260, but has different power options and capabilities. When

systems are duplexed, the same product must be used for both the active and standby

processors. I

In this document, when the name DT-6XXX is used in describing capabilities, commands, and

functions, it means that the reference applies to all three devices: DT-6061, DT-6160, and DT-

6260

The DT-6061 supports a multitude of applications, and may support combinations of these

applications simultaneously. The elements common to all applications are provided by the DT-

6061 hardware and operating environment. In addition, the DT-6061 has an SNMP agent that is

completely independent of any application.

The basic configuration for the DT-6061 may be as follows:

Network Element

Specific Protocol

Network Element

Network

IP Hosts

DT-6061

Figure 1: Typical DT-6061 Deployment

In the above figure representing a generic configuration for a DT-6061, the Network Element (NE)

communicates with IP Hosts over an IP Network using the DT-6061 as an intermediary for

protocol conversion / termination. The NE uses its specific communications protocol to talk

through a DT-4000 or some other device(s) that will bridge the NE with an IP infrastructure. The

DT-6061 running one of its custom applications performs the necessary protocol translation or

termination allowing the NE and IP-Hosts to ultimately communicate.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 71 72

Pas de commentaire

Datatek DT-6061 Manuel d'utilisateur Page 8